Sony NEX-FS700 Operating Manual Download Page 32

Page: 32 / 137

You can attach a flash memory unit HXR-
FMU128 (sold separately) to your
camcorder for recording movies.

While sliding the RELEASE lever,
align the mark on the camcorder
with the one on the flash memory
unit, and slide the flash memory unit
in the direction of the arrow.

To remove the flash memory unit

Turn off the power, then while sliding the
RELEASE lever, remove the flash memory
unit in the direction of the arrow.

When you do not use a flash memory
unit

Leave the flash memory unit jack cover
attached.

Tips

• Your camcorder does not have the relay

recording function. If the memory card is fully
recorded during recording, the camcorder stops
recording automatically.

• You can record movies on both of the memory

card and the flash memory unit simultaneously
(p. 34).

Flash memory unit

Align the marks.

RELEASE lever

Step 7: Preparing the recording media (Continued)

Summary of Contents for NEX-FS700










































































































































Search results

Summary of Contents for NEX-FS700

Reviews:

Related manuals for NEX-FS700

Brands by name

Popular brands

Sony NEX-FS700, Operating Manual

Search results

Summary of Contents for NEX-FS700

Reviews:

Related manuals for NEX-FS700

Brands by name

Popular brands