Sony MZ-NHF800, Operating Instructions Manual

Page: 96 / 132

96
READ
ERROR • The recorder cannot read the disc information correctly.
, Reinsert the disc.
REC ERROR • Recording was not correctly done.
,
Place the recorder at a place with no vibrations and record again.
• The disc is soiled with an oil film or finger prints, is scratched, or is not a
standard disc.
,
Try recording again with another disc.
SYSTEM
FILE
WRITING • The recorder is storing information (track start and end position) from the
memory to the disk.
, Wait until this process is completed. Do not expose the player to
physical shock, nor disrupt power supply.
TEMP OVER
REC STOP • Heat has built up in the recorder.
,
Let the recorder cool down.
TITLE FULL • You tried to enter more than 200 letters to label a single track, group, or
disc.
• You tried to enter a total of more than approximately 55,000 letters (in Hi-
MD mode) or 1,700 letters (in MD mode) for titles.
TOC DATA
ERROR • The recorder cannot read the disc information correctly.
,
Insert another disc.
,
If it is no problem to erase the entire disc, do so (page 65).
TRACK
FULL • You tried to record more than 2,047 tracks on a disc in Hi-MD mode or
more than 254 tracks on a disc in MD mode.
,
Erase unnecessary tracks (page 65).
TrkFromPC
NO EDIT • You tried to combine or divide tracks that were transferred from the
computer.
, You cannot combine or divide transferred tracks.
• You tried to combine or divide tracks that were recorded in Hi-MD mode
using the MD Simple Burner software.
, You cannot combine or divide tracks recorded in Hi-MD mode with the
MD Simple Burner software.
TrkFromPC
NO REC • You tried to record in the middle of a protected track that has been
transferred from the computer.
• You tried to record in the middle of a track that was recorded in Hi-MD
mode with the MD Simple Burner software.
,
You cannot record new material in the middle of a protected track or a
track that was recorded in Hi-MD mode with the MD Simple Burner
software.
Message Meaning/Remedy