Sony MZ-NHF800 Operating Instructions Manual Download Page 115

Page: 115 / 132

115

Transferring back audio data from the MD Walkman
to your computer

Audio data that has been transferred from your computer and stored on the MD can be
transferred back to My Library of SonicStage on your computer.

Connect your MD Walkman to the computer.

For details about connections, see “Recorder Operation”.
Do not disconnect the power source or the dedicated USB cable before the transfer has
completed.

Select the transfer destination and click [Transfer] on the right side of the
screen.

The screen is switched to the Transfer (Net MD) screen.

In the Net MD list on the right side of the screen, click to select the tracks you
want to transfer to your computer.

Click

in the middle of the screen.

The transferring of the tracks selected in step 3 starts.

Transferring from the MD Walkman back to your computer

Transfer
Destination list

The My Library list

[Transfer]

List of tracks on
the MD

Summary of Contents for MZ-NHF800





































































































































Search results

Summary of Contents for MZ-NHF800

Reviews:

Related manuals for MZ-NHF800

Brands by name

Popular brands

Sony MZ-NHF800, Operating Instructions Manual

Search results

Summary of Contents for MZ-NHF800

Reviews:

Related manuals for MZ-NHF800

Brands by name

Popular brands