Sony MZ-NHF800 Operating Instructions Manual Download Page 49

Page: 49 / 132

Listening to tracks of a selected
album (Album Play) (in Hi-MD mode
only)

If the track data includes the album name,
you can listen to tracks of a selected
album only.

Do step 1 and select “Album” in step
2 of “Playing tracks in Main play
mode” (page 47).

A list of the albums on the disc
appears in alphabetical order.

Turn the jog dial until the desired
album name appears in the display,
and then press

ENT to enter.

A list of the tracks in the selected
album appears in recorded order.

Turn the jog dial until the desired
track appears in the display, and then
press

ENT to enter the selection.

The name of the album to which the
current track belongs appears in the
display. The recorder plays the tracks
in that album, from the current track
to the last track.

You can cue to the first track of the next or
previous album. While playing, press GROUP
on the recorder, and press the 5-way control key
towards

Listening to selected tracks only
(Bookmark Play)

You can bookmark tracks on a disc and
play them only. The sequence of
bookmarked tracks cannot be changed.

To bookmark the tracks

While playing the track you want to
bookmark, press

ENT for 2

seconds or more.

The first track of the bookmark play
is set.

Repeat step 1 to bookmark the other
tracks.

To play the bookmarked tracks

Do step 1 and select “Bookmark” in
step 2 of “Playing tracks in Main play
mode” (page 47).

Turn the jog dial to select a track, and
then press

ENT to enter the

selection.

The recorder plays the bookmarked
tracks in the order of their track
numbers.

To erase bookmarks

While playing the track for which you
want to erase the bookmark, press

ENT for 2 seconds or more.

Bookmark flashes.

Summary of Contents for MZ-NHF800





































































































































Search results

Summary of Contents for MZ-NHF800

Reviews:

Related manuals for MZ-NHF800

Brands by name

Popular brands

Sony MZ-NHF800, Operating Instructions Manual

Search results

Summary of Contents for MZ-NHF800

Reviews:

Related manuals for MZ-NHF800

Brands by name

Popular brands