37
MZ-E510
Pin No.
51
52
53
54 to 56
57
58
59
60
61
62
63
64 to 66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
I/O
O
O
O
O
O
O
O
O
O
O
O
O
I
I
O
I/O
O
O
O
O
O
O
O
I
I
I
I
O
O
O
O
O
O
O
I
O
I
I
I
O
O
O
I
O
O
O
I
I
O
O
Pin Name
XBCK
FS256
FOCN
TSTDR1 to 3
PL0/MNT0
PL1/MNT1
PL2/MNT2
PL3/MNT3
PL4/SENS
DCLSOUTL
DCLSOUTR
NC
PD0/XSCS0
SI0
SO0
SCK0
XHP_STBY
BEEP
XRST_CHG
XSLP_MTR_OP
PD_S1
LINK_MON
NC
SET_CODE0
SET_CODE1
SET_CODE2
SLD_CON_U
NC
PWR_SLEEP
PWR_FFCLR
XCH_I_LIMIT
NC
LED_O_CTL
NC
XTEST
XRF_RST
XCHG_WK_DET
HOLD
COUT_MON
CHG_AD_SEL
CHG_AMP_SEL
XDC_IN
CLV_CON_U
PWR_STRB
HP_MUTE
SP_MUTE
SP-ON
SP_SOUND_ON
XRST_MTR_DRV
XCS_NV
Description
Bit clock (2.8224MHz) output to the external A/D converter Not used (open)
11.2896MHz clock output
Filter cutoff control signal output Not used (open)
Not used (open)
DSP monitor output terminal 0 Not used (open)
DSP monitor output terminal 1 Not used (open)
DSP monitor output terminal 2 Not used (open)
DSP monitor output terminal 3
DSP internal status (DSP SENS monitor) signal output terminal Not used (open)
PWM modulator signal output for the D class headphone amplifier Not used (open)
PWM modulator signal output for the D class headphone amplifier Not used (open)
Not used (open)
Patch function detection terminal “L”: patch function (fixed at “L” in this set)
Serial data input from the nonvolatile memory
Serial data output to the nonvolatile memory and power control
Serial clock output to the nonvolatile memory and power control
Power supply control signal output to the headphone amplifier
Beep sound control signal output to the headphone amplifier
Reset signal output to the battery charge control IC
PD IC mode changeover signal output to the optical pick up
PD IC mode changeover signal output to the optical pick up
Linking area monitor signal output Not used (open)
Not used (open)
Input terminal for the set (fixed at “H” in this set)
Input terminal for the set (fixed at “L” in this set)
Input terminal for the set (fixed at “L” in this set)
Sled servo monitor signal input
Not used (open)
System sleep control signal output to the power control
Input latch output for the start switching to the power control
Charge current limit ON/OFF control signal output at the time of adaptor use
Charge current limit value changeover control signal output at the time of adaptor use Not used (open)
Orange LED ON/OFF control signal output
Not used (open)
Terminal for the test mode setting (normally open) “L”: test mode
Reset control signal output to the RF amplifier “L”: reset
External power supply (AC adaptor/charging stand) detection signal input
HOLD switch input terminal “L”: hold ON
Traverse count measurement monitor input
A/D terminal of the battery charge control IC output selection signal output
Charge/discharge changeover control signal output for the current sense amplifier
Not used (open)
Spindle servo monitor signal input
Chip select signal output to the power control
Analog muting control signal output to the headphone amplifier “H”: muting ON
Muting control signal output to the speaker amplifier “L”: muting ON Not used (open)
External speaker changeover request signal input Not used (open)
External speaker and sound on changeover request signal input Not used (open)
Reset control signal output to the motor driver “L”: reset
Chip select signal output to the nonvolatile memory