11
MZ-E510
Self-Diagnosis Result Display Mode
This set uses the self-diagnostic function system in which if an
error occurred during the playing, the mechanism control block
and the power supply control block in the microcomputer detect it
and record its cause as history in the nonvolatile memory.
By checking this history in the test mode, you can analyze a fault
and determine its location.
• Self-diagnosis result display mode setting method
1. Set the test mode (see page 9).
2. In the display check mode, pressing the
[GROUP]
key or press-
ing the
[DISPLAY]
key on the remote commander activates
the self-diagnosis result display mode where the LCD display
as shown below.
3. Then, each time the
>
key is pressed, LCD display descends
by one as shown below. Also, the LCD display ascends by one
when the
.
key is pressed.
4. Quit the self-diagnosis result display mode, and press the
x
key to return to the test mode (display check mode).
5. The display changes a shown below each time the
[DIS-
PLAY]
key on the remote commander is pressed.
However in the power mode (item number 700’s), only the
item is displayed.
6. Quit the manual mode, and press the
x
key to return to the
test mode (display check mode).
Overall Adjustment Mode
Mode to adjust the servo automatically in all items.
Normally, automatic adjustment is executed in this mode at the
repair.
For further information, refer to “SECTION 5 ELECTRICAL
ADJUSTMENTS” (see page 14).
Remote commander LCD display
history code
simple display
error display code
1 - - - -
0XX
item number
address
adjusted value
item number
jitter value
adjusted value
item number
block error
value
adjusted value
item number
ADIP error
value
Focus drive
value
adjusted value
item number
adjusted value
item number
item title
adjusted value
• Address & Adjusted Value Display
Remote commander LCD display
• Jitter Value & Adjusted Value Display
Remote commander LCD display
C 6 8 S 0 1
011
• Block Error Value & Adjusted Value Display
Remote commander LCD display
• ADIP Error Value & Adjusted Value Display
Remote commander LCD display
• Focus Drive Value & Adjusted Value Display
Remote commander LCD display
• Item Title Display
Remote commander LCD display
0 6 3 B 0 1
011
0 5 9 A 0 1
011
0 1 5 F 0 1
011
O F F J 0 1
011
L r e f P w 0 1
011
0XX
1 * * * *
0XX
N * * * *
0XX
N 1 * * * *
0XX
N 2 * * * *
1
1
XX
: Error code
* * * *
: simple display