Sony MVS8000SF-C, Installation Manual

Page: 70 / 72

2-2
MVS-8000SF
2. Fan
MVS-8000SF is air-cooled by the fans (on both sides).
If dust has accumulated in the intake of the fan, air is
prevented from flowing smoothly and this may result in a
temperature rise inside the machine. This may have an
adverse effect on performance and the life of the machine.
Cleaning of the fan every month is recommended.
Contact your local Sony Sales Office/Service Center for
information on cleaning the fan.
2-3. About the Data Backup Capacitor
A large capacitor is installed on the CA-44 board in order
to backup the memory storing the setup and other data in
the MVS-8000SF.
Leave the main power of the MVS-8000SF turned on for
one hour or longer in order to charge the large capacitor.
The data can be backed up for about one week when the
capacitor is fully charged under the normal operating
temperature.
2-2. Periodic Inspection and Maintenance
2-3. About the Data Backup Capacitor
2-2. Periodic Inspection and Maintenance
2-2-1. Cleaning
1. Front panel
The filter on the rear of the front panel can easily accumu-
late the dust. Be sure to remove dust by cleaning as
follows.
(1) Remove the front panel. (Refer to Section 1-4-1.)
(2) Remove the dust accumulated on the filter with a
vacuum cleaner.
n
Cleaning the filter by washing in water is recommend-
ed when there is a heavy accumulation of dust.
Be sure to dry the filter completely after it has been
washed.
Filter
Front panel
Fan
Fan
Fans
Fans