Sony MVS-6500 System Startup Manual Download Page 46

Page: 46 / 57

Video Switching (Transitions)

age
Cre

ion
Op
er

ions

Select the portion of the image to change using the
transition.

Press one of the next transition selection buttons in the
transition control block, turning it on.
• [BKGD] button: Changes the background.
• [KEY1] to [KEY4] buttons: Inserts (or deletes) key

1 to key 4, respectively.

In this example, press the [BKGD] button.

Transition control block

Select the type of transition

(

p. 43)

Press one of the following transition type selection
buttons, turning it on.
• [MIX] button: Go to step

• [NAM] button: Go to step

• [WIPE] button: Go to step

• [DME] (DME wipe) button:

p. 48

Transition control block

If WIPE is selected in step

, choose a wipe pattern.

Open the M/E-1 >Wipe >Main Pattern menu
(1151).

Main Pattern menu

Press the desired pattern to select it.
In this example, select “12”.

Set the transition rate.

In the Flexi Pad, press the [TRANS RATE] button.

Press the [M/E1] button, turning it on.

While viewing the alphanumeric display, enter the
transition rate you want to set.
As an example, enter “20” (frames).

Press the [ENTR] button.

Flexi Pad

Execute the transition.

Check the post-transition video on the preview
monitor.

Operate the fader lever.
In this example, pull the lever from top to bottom.

BKGD button

Next transition selection buttons

Fader lever

Transition type selection buttons

Fader lever

Alphanumeric display

TRANS RATE button

M/E1 button

Summary of Contents for MVS-6500 System


























































Search results

Summary of Contents for MVS-6500 System

Reviews:

Related manuals for MVS-6500 System

Brands by name

Popular brands

Sony MVS-6500 System, Startup Manual

Search results

Summary of Contents for MVS-6500 System

Reviews:

Related manuals for MVS-6500 System

Brands by name

Popular brands