18
Turning Power On/Off
Pre
par
at
ion
A shutdown confirmation message appears.
Press [Yes] to commence shutdown. The process is
completed when the menu screen goes completely
black.
Check that the POWER switch indicator “
1
” on the
control panel has gone out.
You can forcibly turn off the power to the control
panel without following the normal shutdown
procedure by pressing and holding the POWER switch
for five seconds or longer. If you force shutdown,
settings data may not be saved.
3
Set the POWER A and B switches of the switcher
processor to OFF (“
a
” side).
Opening Menus
In the MVS system, basic operations and system setup can
be done using the menu.
This section describes how to open the “M/E-1 >Key1
>Type menu (1111)” as an example. Other menus can be
opened using the same procedure.
For details about menu operations, refer to the User’s
Guide.
1
Recall the top menu (top level in menu hierarchy).
a
Press the menu page number button.
The top menu window appears.
b
Press a top menu selection button.
In this example, press [M/E1].
You can also open the top menus using the top menu
selection buttons in the menu panel.
2
Select a menu.
a
Select a submenu (level 2 in the menu hierarchy)
using VF buttons on the left edge.
In this example, select [Key1].
b
Select a submenu (level 3 in the menu hierarchy)
using HF buttons on the bottom edge.
In this example, select [Type].
The M/E-1 >Key1 >Type menu appears.
You can also open the menu by entering the page
number “1111” in the top menu window.
Notes
Menu page number button
Top menu selection buttons
Top menu window
Memo
Memo
Top menu selection buttons
VF buttons
HF buttons
