1-11 (E)
MPE-200
3. LED-495 board
<Switch >
n
S1 can be operated on the front panel.
Ref No.
Address
Name
Function
S1
(Side B)
Power
The system starts when pressed during standby.
The system shuts down when pressed for 2 seconds during operation.
The power turns off forcibly when pressed for 5 seconds during operation.
<LED >
m
.
D1 and D2 light for the INFORMATION LED on the front panel.
.
D3 and D4 light for the power LED on the front panel.
Ref No.
Address
Name
Indication color
Function
Normal state
D1
(Side B)
Message
Blue
Displays the system status in combination with
Lights on
Pow/Stb LED.
*
1
D2
(Side B)
Message
Red
Displays the system status in combination with
Lights off
Pow/Stb LED.
*
1
D3
(Side B)
Pow/Stb
Green
Displays the system status in combination with
Lights on
Message LED.
*
1
D4
(Side B)
Pow/Stb
Red
Displays the system status in combination with
Lights off
Message LED.
*
1
*
1:
Status
Pow/Stb LED
Message LED
Power not supplied
Off
Off
Standby status
Lit (red)
Off
Unit starting up
Blinking (green)
Off
Firmware starting up
Lit (green)
Off
Operation normal
Lit (green)
Lit (blue)
Shutting down
Lit (green)
Off
Unit shutting down
Blinking (red)
Off
Warning status
_
Blinking (blue)
Error status
_
Blinking (red)
S1
D3
D4
D2
D1
Side B
Summary of Contents for MPE-200
