Sony MKS-8800, Operation Manual

Page: 7 / 16

7
Location and Function of Parts
Rear Panel
a
a a
a
SWITCHER (switcher I/O) A and B connectors
(MDR 68-pin) (MKS-8820M)
Connect with the supplied special cable to the DME 1A
and 1B connectors of the MVS-8000 Multi Format
Switcher Processor.
Each connector handles two channels of video signal input
and output. Therefore, when this unit is configured for one
or two channels (with one or two MKS-8810M boards
installed), you do not need to connect the SWITCHER B
connector.
If you are connecting a second MVE-8000 Multi Format
DME Processor to the MVS-8000, connect the
SWITCHER A and B connectors on the second processor
to the DME 2A and DME 2B connectors on the MVS-
8000.
b
b b
b
- - - - AC IN (AC power input) connector (3-pin)
Connect to 100 to 240 V AC power supply with the
optional AC power cord.
c
c c
c
U U U U (signal ground) terminal
Connect to the system ground.
d
d d
d
GPI (General Purpose Interface) connector (D-sub,
25-pin)
Connect to external devices for input and output of trigger
signals. Up to eight inputs and eight outputs are possible,
with input and output conditions set on the center control
panel.
e
e e
e
EDITOR connector (D-sub, 9-pin, RS-422A)
Connect to control this unit from a BVE-9100 or other
editing control system.
EDITOR GPI CTRL DATA REF IN
-
AC IN
U
SWITCHER A SWITCHER B
2
-
AC IN connector
7
DATA connector
8
REF INPUT connectors
1 SWITCHER A and B connectors
a)
6
CTRL connector
5
EDITOR connector
4
GPI connector
3
U U U U terminal
a) This figure shows the rear panel when one MKS-8810M is installed in the
unit.