1-17 (E)
MVS-6520
D2200 to D2207 (F-1): IMP1 (PP_K12) status LED
IMP1 status indication.
D2208 to D2215 (F-1): IMP2 (PP_K34) status LED
IMP2 status indication.
D2300 to D2307 (G-1): IMP3 (ME1_K12) status LED
IMP3 status indication.
D2308 to D2315 (G-1): IMP4 (ME1_K34) status LED
IMP4 status indication.
D600 (J-1): RESET status LED
Not used.
Switch
S600 (J-1): RESET switch
Not used.
Connector
CN1101 (H-1): DEBUG connector
Not used.
CN1100 (H-1): EPR2 connector
For production.
CN2400 to CN2403: TERM1-4 connector
Not used.
CN1102 to CN1105: JTAG ICE (IMP1-4) connector
Not used.
LED
D302 (C-1):
+
12V
+
12V power status indication.
Lit when
+
12V is supplied.
D304 (C-1):
+
3.3V
+
3.3V power status indication.
Lit when +3.3V is supplied.
D305 (D-1):
+
2.5V
+
2.5V power status indication.
Lit when
+
2.5V is supplied.
D306 (D-1):
+
1.8V
+
1.8V power status indication.
Lit when
+
1.8V is supplied.
D303 (D-1):
+
1.2V
+
1.2V power status indication.
Lit when
+
1.2V is supplied.
D307 (E-1):
+
1.0V
+
1.0V power status indication.
Lit when
+
1.0V is supplied.
D309 (E-1):
+
0.9V
+
0.9V power status indication.
Lit when
+
0.9V is supplied.
D308 (C-1): REG (
+
1.5V-A,
+
1.1V-A)
+
1.5V-A and
+
1.1V-A power status indication.
Lit when
+
1.5V-A and
+
1.1V-A are supplied.
D310 (D-1):
+
1.2V-A
+
1.2V_A power status indication.
Lit when
+
1.2V-A is supplied.
D700 (E-1): CADEC Config Status LED
If the LED stays lit, CADEC (IC006) may not operate
normally.
D1000 to D1004 (E-1): FPGA Config Status LED
Lit during each configuration of FPGA (IMPIF 4 to 1,
MIXER) and goes out when it is completed.
If the LED stays lit, FPGA being configured may not
operate normally.
