![background image](http://html.mh-extra.com/html/sony/mhc-zx10-mini-hifi-component-system/mhc-zx10-mini-hifi-component-system_service-manual_1330157018.webp)
17
2. Correction of Errors
[When due to tape deck]
Stopped while tape aging operation with the “ ” displayed state.
[When due to CD]
Press
x
, DISPLAY , and
Z
together to display the error code.
• Display of number of mechanism errors
Move the stick to the left and right to display “CDM Err Count *”.
* is the number of mechanism errors.
• Display of mechanism error
Move the stick to the left and right to display “CDM E**D##$$%%!!”.
Move the stick up and down to send the error number.
**
: Error number 00 is the latest error.
The larger the number, the older will the error be. (Maximum 9)
##
: FF is the mechanism error after mechanism initialization ends.
$$
: Judge from the first digit of the error number. (Don’t care the second digit.)
When the error number is 1 or 2, it indicates mechanism error in tray loading between the stocker position and behind it.
%% : Judge from the first digit of the error number. (Don’t care the second digit.)
When the error number is 2, it indicates mechanism error in the up/down movements of the stocker.
!!
: Judge from the first digit of the error number. (Don’t care the second digit.)
When the error number is 2, it indicates mechanism error during switching of the clamper and mode.
• No DISC error display
Move the stick left and right to display “No Disc Count *”.
* means the number of no discs.
• No DISC error display
Move the stick left and right to display “No E**D##$$%%00”.
Move the stick up and down to send the error number.
**
: Error number 01 is the latest error.
The larger the number, the older will the error be. (Maximum 3)
##
: 01 .... FOCUS ERROR
02 .... GFS ERROR
03 .... SET UP ERROR
$$
: 00 .... Judged as No DISC without attempting chucking retry
02 .... Judged as No DISC after chucking retry
%% : Judged with the first digit of the error number in the state where No DISC has been determined.
(Don’t care the second digit.)
1 ...... STOP
2 ...... SET UP
3 ...... TOC Read
4 ...... Access
5 ...... PLAY
6 ...... PAUSE
7 ...... Manual Search (during PLAY)
8 ...... Manual Search (during PAUSE)
3. Ending the Aging Mode
1) End the Aging Mode with the power off.
2) To reset the CD error history, be sure to perform cold reset.
Summary of Contents for MHC-ZX10 - Mini Hifi Component System
Page 29: ...HCD ZX10 28 28 6 3 PRINTED WIRING BOARD BD SECTION See page 23 for Circuit Boards Location ...
Page 34: ...HCD ZX10 33 33 6 8 SCHEMATIC DIAGRAM MAIN 1 3 SECTION 1 3 1 3 ...
Page 42: ...HCD ZX10 41 41 6 16 SCHEMATIC DIAGRAM SWITCH SECTION ...
Page 44: ...HCD ZX10 43 43 09 H I Page 34 Page 34 6 18 SCHEMATIC DIAGRAM CD MECHANISM SECTION ...