![background image](http://html.mh-extra.com/html/sony/mhc-zx10-mini-hifi-component-system/mhc-zx10-mini-hifi-component-system_service-manual_1330157017.webp)
16
[Aging Mode]
This mode can be used for operation check of CD section and tape deck section.
• If an error occurred:
The aging operation stops and display status.
• If no error occurs:
The aging operation continues repeatedly.
1.
Operating method of Aging Mode
Turn on the main power and select “CD” of the function.
1) Set a disc in DISC1 tray. Select ALL DISC CONTINUE, and REPEAT OFF.
2) Load the tapes recording use into the decks A and B respectively.
3) Press three buttons
x
, DISPLAY , and DISC 4 simultaneously.
4) Aging operations of CD and tape are started at the same time.
• Tape Deck
1.
The tape in deck A is rewound. “TAPE A AG-1” is displayed.
2.
The FWD side of deck A is played for two minutes.
“TAPE A AG-2” is displayed.
3.
The tape in deck A is fast forwarded. “TAPE A AG-3” is displayed. Fast forward is carried out for 20 seconds or to the tape end.
4.
The RVS side of deck A is played for two minutes.
“TAPE A AG-4” is displayed.
5.
The tape in deck A is rewound. “TAPE A AG-5” is displayed.
6.
The FWD side of deck B is played for two minutes.
“TAPE B AG-2” is displayed.
7.
The tape in deck B is fast forwarded. “TAPE B AG-3” is displayed. Fast forward is carried out for 20 seconds or to the tape end.
8.
The RVS side of deck B is played for two minutes.
“TAPE B AG-4” is displayed.
9.
The tape in deck A is rewound. “TAPE A AG-5” is displayed.
10. Repeated from step 2.
• CD
1.
The tray rotates.
2.
DISC 5 is chucked.
3.
The TOC is read.
4.
The first track is played for 3 seconds.
5.
The last track is played for 3 seconds.
6.
DISC 1 is open.
7.
DISC 1 is close.
8.
Repeated from step 2.
Summary of Contents for MHC-ZX10 - Mini Hifi Component System
Page 29: ...HCD ZX10 28 28 6 3 PRINTED WIRING BOARD BD SECTION See page 23 for Circuit Boards Location ...
Page 34: ...HCD ZX10 33 33 6 8 SCHEMATIC DIAGRAM MAIN 1 3 SECTION 1 3 1 3 ...
Page 42: ...HCD ZX10 41 41 6 16 SCHEMATIC DIAGRAM SWITCH SECTION ...
Page 44: ...HCD ZX10 43 43 09 H I Page 34 Page 34 6 18 SCHEMATIC DIAGRAM CD MECHANISM SECTION ...