Basic Operations
17
n
1
Press TUNER BAND repeatedly
until the band you want appears in
the display.
Every time you press the button, the
band changes as follows:
FM
n
MW
n
SW
2
Turn the jog dial (or press
=
or
+
on the remote) to tune in the
desired preset station.
To
Do this
Turn off the radio
Press
(power).
Adjust the volume
Turn VOLUME (or press
/– (MHC-
WX7AV) or VOL +/–
(MHC-WX5) on the
remote).
Turn counter-
clockwise
(or press
=
on the remote)
for lower preset
numbers.
Turn clockwise
(or press
+
on the remote)
for higher
preset numbers.
ß
RELAY
DAILY 1 2 REC SLEEP
DAILY 1 2 REC SLEEP
DOLBY NR
DOLBY NR
PROGRAM
REPEAT1
SHUFFLE
ALL DISCS
1
TUNED
MONO
STEREO
SYNC
STEP
MHz
kHz
REC
t
VOLUME
SUR
1
Preset number
Frequency
To listen to non-preset radio
stations
Use manual or automatic tuning. For manual
tuning, press – or + repeatedly. For automatic
tuning, press and hold – or +.
Tips
• Pressing TUNER BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER BAND (Automatic Source
Selection).
• When an FM program is noisy, press STEREO/
MONO so that “MONO” appears in the display.
There will be no stereo effect, but the reception
will improve. Press the button again to restore the
stereo effect.
• To improve broadcast reception, reorient the
supplied antennas.
