![background image](http://html.mh-extra.com/html/sony/mhc-v90dw/mhc-v90dw_operating-instructions-manual_1330135069.webp)
69
GB
Other Oper
ations
MHC-V90DW.GB.4-694-841-
35
(1)
Note
You cannot perform the following
operations when BLUETOOTH/Wi-Fi
signal is set to off:
— Pairing and/or connecting with
BLUETOOTH device
— Using “SongPal”
Updating the software
The software of this system may be
updated in the future.
You can update your system’s pre-
installed software by using one of
the following 3 methods:
Automatic update via the
Internet
When the system is connected to
the Internet, the system updates
the software automatically if a new
update file is detected. This feature
requires the settings to be made
by using a smartphone/iPhone
installed with “SongPal”.
Launch “SongPal” on your
smartphone/iPhone, and set [Auto
Update] in the [Settings] menu.
Refer to SongPal Help for more
details.
http://info.songpal.sony.net/help/
Note
•
•
For the models sold in Europe,
to comply with the power saving
regulation in Europe, products with
the serial number S015503001 or later
cannot use this function when the
product is connected to the wired
network or not connected to the
wireless network. This function will
not be available when the network
connection is disconnected as well.
•
•
When the multi-room function turns on,
it supports TDLS (Tunneled Direct Link
Setup) and works as a wireless router
that improves the data communication
quality.
Hint
Automatic update will start updating
the software after downloading all
the update files. So, data corruption
and loss do not occur even if the
network connection is unintentionally
disconnected. If the error message
persists, perform the manual update via
a USB device.
Manual update via the Internet
When the system is connected to
the Internet, “UPDATE” lights up on
the display if the system detects a
new update file.
1
Press OPTIONS.
2
Press / repeatedly to select
“SYSTEM”, then press
.
3
Press / repeatedly to select
“UPDATE”, then press
.
4
Press / repeatedly to select
“VIA NW”, then press
.
5
Press / repeatedly to select
“EXEC”, then press
.
6
Press / repeatedly to select
“YES”, then press
.
To exit the options menu, press
OPTIONS.