![background image](http://html.mh-extra.com/html/sony/mhc-v90dw/mhc-v90dw_operating-instructions-manual_1330135059.webp)
59
GB
Other Oper
ations
MHC-V90DW.GB.4-694-841-
35
(1)
•
•
Language Follow
* Control for HDMI is a standard used
by CEC (Consumer Electronics Control)
for allowing HDMI (High-Definition
Multimedia Interface) devices to control
each other.
Note
These functions may work with devices
other than those manufactured by Sony,
but operation is not guaranteed.
Preparing to use the Control for
HDMI function
Press DVD SETUP, then set [HDMI
SETUP] – [CONTROL FOR HDMI] on
the system to [ON] (page 40). The
default setting is [ON].
Enable the Control for HDMI function
settings for the TV connected to the
system.
Hint
If you enable the Control for HDMI
(“BRAVIA” sync) function when using a
TV manufactured by Sony, the Control
for HDMI function of the system is also
enabled automatically. When settings are
completed, “COMPLETE” appears on the
display.
System Power Off function
When you turn off the TV, the system
will turn off automatically.
Press DVD SETUP, then set
[HDMI SETUP] – [STANDBY LINKED
TO TV] on the system to [ON] or
[AUTO] (page 40). The default
setting is [AUTO].
Note
The connected device may not turn off
depending on the status of the device.
System Audio Control function
If you turn on the system while you
are watching the TV, the TV sound
will be output from the speakers
of the system. The volume of the
system can be adjusted using the
TV’s remote control.
If the TV sound was output from the
speakers of the system the previous
time you watched the TV, the system
will be turned on automatically
when you turn on the TV again.
Operations can also be made by the
TV’s menu. For details, refer to the
operating instructions of your TV.
Note
•
•
The system’s volume level is displayed
on the TV screen depending on the TV.
It may differ from the volume level on
the display.
•
•
Depending on the settings of the TV,
the System Audio Control function may
not be available. For details, refer to the
operating instructions of your TV.
Audio Return Channel
If the system is connected to a TV’s
HDMI IN jack compatible with Audio
Return Channel, you can listen to
TV sound from the speakers of the
system without connecting an audio
cable (not supplied).
On the system, press DVD SETUP,
then set [HDMI SETUP] –
[AUDIO RETURN CHANNEL] to [ON]
(page 40). The default setting is
[ON].
Note
If the TV is not compatible with Audio
Return Channel, an audio cable (not
supplied) needs to be connected
(page 26).