MHC-V77DW
6
2. Touch and hold WPS key on the unit until the NETWORK
indicator
fl
ashes in white.
NETWORK
WPS
3. Within 90 seconds, press the Wi-Fi Protected Setup
TM
(WPS)
button of the router.
When the NETWORK indicator lights up in white, the Wi-Fi
network connection is complete.
NETWORK
NETWORK
m
WPS
Depending on the wireless router, press and hold the WPS button
for a few seconds. For details, refer to the operating instructions
of your router.
• The WPS button may be called “AOSS button” depending on
the wireless router.
IMPORTANT NOTE OF DHSR-SY30 AT BENTEN-
MOTHERBOARD BOARD
Be sure to plug in the HARNESS, COAXIAL to DHSR-SY30
after replacing the BENTEN-MOTHERBOARD board.
DHSR-SY30
HARNESS, COAXIAL
FROM ANTENNA BOARD
BENTEN-MOTHERBOARD
BOARD
BOND FIXATION OF ELECTRIC PARTS
When 2CH DAMP board is replaced, it is necessary to
fi
x parts to
the boards by using a speci
fi
ed bond without fail.
• Object boards
Complete 2CH DAMP board
• Use bond
1) SILICONE RTV ADHESIVE (UB-501G) 300ML
2) HM-40 (E318202) 300ML
• Parts position
1.
2CH DAMP board (page 6)
1. 2CH DAMP board
C1094
C1093
– 2CH DAMP Board (Component Side) –
The portion which applies bond:
