Sony MHC-V72D, Operating Instructions Manual

Page: 59 / 80

MHC-V82D/MHC-V72D.GB.5-000-538- 13(1)
Other Oper
ations
59
GB
Using the Voice
Guidance
IMPORTANT: THE VOICE GUIDANCE
FOR THIS SYSTEM IS ONLY
AVAILABLE IN ENGLISH.
1
Press OPTIONS.
2
Press / repeatedly to select
“VOICE GUIDANCE”, then press
.
3
Press / to select “ON”, then
press .
The Voice Guidance is activated.
To exit the options menu, press
OPTIONS.
Depending on the status of the
system, the voice guidance outputs
from the system as follows:
•
•
When setting the system to the
pairing mode: “BLUETOOTH
pairing”
•
•
When connected to a BLUETOOTH
device: “BLUETOOTH connected”
•
•
When disconnected from a
BLUETOOTH device: “BLUETOOTH
disconnected”
•
•
When the settings are completed
for the Speaker Add function:
“Double mode”
•
•
When setting the output mode
during the Speaker Add function:
“Left/Right/Double mode”
To deactivate the Voice Guidance
Select “OFF” in step 3.
To adjust the level of the Voice
Guidance
1
Press OPTIONS.
2
Press / repeatedly to select
“SAMPLER”, then press
.
3
Press / repeatedly to adjust
the Voice Guidance level, then
press .
To exit the options menu, press
OPTIONS.
Note
•
•
The Voice Guidance volume level
change according to the system’s
volume level. However, in some cases,
the Voice Guidance volume level may
not change.
•
•
In some cases, there may be a delay
in Voice Guidance output or the Voice
Guidance may not work.
Using optional
equipment
1
Press

– repeatedly until “VOL
MIN” appears on the display.
2
Use an audio cable (not
supplied) to connect audio
output jacks of an optional
equipment to AUDIO/PARTY
CHAIN IN (TV) L/R jacks on the
unit.
3
Press FUNCTION repeatedly to
select “AUDIO IN”.
4
Start playing the connected
equipment.
5
Press

+ repeatedly to adjust
the volume.
Note
The system may enter standby mode
automatically if the volume level of the
connected equipment is too low. Adjust
the volume level of the equipment.
To turn off automatic standby function,
see “Setting the automatic standby
function” (page 60).