![background image](http://html.mh-extra.com/html/sony/mhc-v71/mhc-v71_service-manual_1330119022.webp)
MHC-V71/V71D
22
2-14. BOTTOM COVER SECTION
– Rear view –
qh
360 BACK L
board
ql
360 BACK
R board
qa
EXTENSION
board
5
CN4500 (8P)
8
CN4501 (4P)
qg
CN4460 (4P)
7
cover, bottom section
Note 2:
When installing the cover, bottom
section, remove the used glue and use
a new glue to fix the cover, bottom section.
q;
one
screw
(+BVTP
3 x 8)
qf
two screws
(+BVTP 3 x 8)
qj
two screws
(+BVTP 3 x 8)
6
Remove the cover, bottom
section in the direction of the
arrow.
2
three screws
((4X13) (TR-184A))
1
four screws
((4X13) (TR-184A))
total five bosses
3
Insert the jig into a space and
slowly remove the cover, bottom
section.
Note 1:
When using a jig,
please work so as not
to injure cover, bottom
section and speaker
cabinet.
4
All bosses are removed
while moving jig in the
direction of the arrow,
and cover, bottom section
is removed.
4
All bosses are removed
while moving jig in the
direction of the arrow,
and cover, bottom
section is removed.
3
Insert the jig into a
space and slowly
remove the
cover, bottom section.
Note 1:
When using
a jig, please
work so as not
to injure cover,
bottom section
and speaker
cabinet.
qs
filament tape
qd
filament tape
3
Insert the jig into a space and
slowly remove the cover, bottom
section.
Note 1:
When using a jig,
please work so as not
to injure cover, bottom
section and speaker
cabinet.
9
CN4502 (4P)
qk
CN4490
(4P)
Note 3 :
When you install
the connector,
please install them
correctly.
There is a possibility
that this machine
damages when not
correctly installing it.
Insert is shallow
Insert is straight
to the interior.
connector
Insert is incline
connector
connector
connector
connector
connector
OK
NG
NG
360 BACK L board
• Wire setting
rear
side
boss
filament
tape
boss
360 BACK R board
• Wire setting
rear
side
filament
tape
SYS SET
2018/05/30 01:52:46 (GMT+09:00)