MHC-V71/V71D
2
SECTION 1
SERVICING NOTES
DESTINATION SETTING METHOD
The destination information isn’t written in the MOTHERBOARD
board for the service.
Therefore, when the MOTHERBOARD board is replaced, be sure
to perform the destination setting (Important work).
Note 1:
The initial setting destination of the MOTHERBOARD board
for the service is temporary set as “LATIN”. The message
“LATIN (T)” is displayed on the screen display panel.
Note 2:
When distinguishing the destination of the product, refer to the
“MODEL IDENTIFICATION” on page 5.
Note 3:
If destination setting isn’t performed, it is possibility to occur
the defect to each operation of this unit.
Note 4:
Destination would be locked if it has changed for 5 times.
Procedure:
1. Touch two touch keys of the [FIESTA] and [
>
]
simultaneously for 10 seconds during the demonstration mode.
2. It enters the destination setting mode, the message
"D XXXXX" is displayed on the screen display panel.
Note 5:
If the message "DESTLOCK" is displayed on the screen dis
-
play panel, touch the [
N
] touch key to release from this mode.
Because the destination is locked, and it cannot change the des-
tination.
3. Touch [
0
+] / [
0
- ] touch key to select the destination based
on the set's country.
Screen
display
Destination
code
Country
"D ASIA"
SP6, TH1
Southeast Asia countries
"D INDIA"
E12
India
"D ME AFC"
E3, E93, E4,
SA2, EA3
Middle East & Africa
countries
"D OCEANI"
AU1
Australia & New Zealand
"D JAPAN"
J1
Japan
"D BRAZIL"
BR1
Brazil
"D N AME"
UC2, CA2
America & Canada
"D LATIN"
LA9, AR2
Central & South America
countries (except Brazil)
"D RUSSIA"
RU1
Russia & CIS country
"D EUROPE"
CEL, CEK
Europe countries (except
CIS country)
4. Touch [
N
]
touch key to confirm the selection.
5. "RESET" appears on the screen display panel. After that,
"SONY"appears on the screen display panel. The system auto-
matically turn on and off once. Please be sure that the system
stay at demo mode finally before switch off the power supply.
6. Mode in "MODEL, DESTINATION AND VERSION
DISPLAY MODE" on page 23 again to confirm on the model
& destination.
SYS SET
2018/05/30 01:52:46 (GMT+09:00)
