![background image](http://html.mh-extra.com/html/sony/mhc-v44d/mhc-v44d_operating-instructions-manual_1330108017.webp)
17
GB
G
ett
in
g
Star
ted
filename[D:\NORM'S JOB\SONY HA\SO150056\MHC-V44D (PMRF
01)\4584073121_GB\050CON.fm]
masterpage:Right
model name [MHC-V44D]
[4-584-073-
12
(1)] GB
To listen to TV sound via the system
If you do not connect the system to the TV’s HDMI IN (ARC) jack, make this
connection.
To listen to TV sound, press FU/– repeatedly to select “TV”.
You can also enjoy the sound of external equipment (DVD players, etc.) via the system
by connecting to the AUDIO IN (TV) jack as connection
above. For details, refer to the
operating instructions of your equipment.
If the audio output level from the system is low when connecting the external
equipment, try adjusting the audio output settings on the connected equipment. It may
improve the audio output level. For details, refer to the operating instructions of your
equipment.
Insert the two supplied R03 (size AAA)
batteries by matching the polarities as
shown below.
Do not mix an old battery with a new
one or mix different types of batteries.
If you do not use the remote control for
a long period of time, remove the
batteries to avoid damage from battery
leakage and corrosion.
To operate the system using the
remote control
Point the remote control at the unit’s
remote control sensor.
Notes
If “CODE 01” and “SGNL ERR” appear in the display panel of the
unit
When the audio input signals to the system are other than 2-channel Linear
PCM signals, the message “CODE 01” and “SGNL ERR” (indicates that the input
audio signals are unsupported) appear in the display panel of the unit.
In this case, select the proper audio output mode on the TV in order to output
2-channel Linear PCM audio signals. For details, refer to the operating
instructions of your TV.
Audio cable (not supplied)
Inserting batteries
Notes