
33
GB
filename[D:\NORM'S JOB\SONY HA\SO150056\MHC-V44D (PMRF
01)\4584073121_GB\070TUN.fm]
masterpage:Right
BL
U
E
T
O
O
T
H
model name [MHC-V44D]
[4-584-073-
12
(1)] GB
If passkey is required on the
BLUETOOTH device, enter “0000”.
“Passkey” may be called “Passcode”,
“PIN code”, “PIN number”, or
“Password”.
6
Perform the BLUETOOTH
connection on the BLUETOOTH
device.
The BLUETOOTH device name
appears in the display panel.
Depending on the BLUETOOTH
device, connection may start
automatically after pairing is
completed.
You can check the BLUETOOTH
device address by pressing DISPLAY
repeatedly.
You can pair up to 9 BLUETOOTH
devices. If the 10th BLUETOOTH device is
paired, the oldest paired device will be
deleted.
If you want to pair with another
BLUETOOTH device, repeat steps 1 to 6.
To cancel pairing operation
Hold down PAIRING on the unit for
2 seconds or more until “BT AUDIO”
appears in the display panel.
To delete pairing information
Use the buttons on the unit to perform
this operation.
1
Press BLUETOOTH to select
BLUETOOTH function.
“BT AUDIO” appears in the display
panel.
If the system is connected to a
BLUETOOTH device, the BLUETOOTH
device name appears in the display
panel. Press BLUETOOTH to
disconnect the BLUETOOTH device.
2
Hold down ENTER and
– for
about 3 seconds.
“BT HIST CLEAR” appears in the
display panel and all the pairing
information is erased.
Playing music from a
BLUETOOTH device
You can operate a BLUETOOTH device
by connecting the system and the
BLUETOOTH device using AVRCP.
Once the system and BLUETOOTH
device are connected, you can control
playback by pressing
,
,
,
/
and
/
.
Check the following before playing
music:
The BLUETOOTH function of the
BLUETOOTH device is turned on.
The pairing has been completed
(page 32).
1
Press BLUETOOTH on the unit to
select BLUETOOTH function.
“BT AUDIO” appears in the display
panel.
2
Establish connection with the
BLUETOOTH device.
Press BLUETOOTH on the unit to
connect to the last connected
BLUETOOTH device.
Perform the BLUETOOTH
connection from the BLUETOOTH
device if the device is not
connected.
Once the connection is established,
the BLUETOOTH device name
appears in the display panel.
3
Press
to start playback.
Depending on the BLUETOOTH
device,
you may have to press
twice.
you may need to start playing an
audio source on the BLUETOOTH
device.
Note
Notes