manualshive.com logo in svg

Sony MHC-V41D, Operating Instructions Manual

Share
Download
Sony MHC-V41D Operating Instructions Manual Download Page 48

48

GB

MHC-V41D.GB.4-729-484-

13

(1)

Gesture Control

Enjoying gesture 

control

You can control operations in 
the PLAYBACK, DJ, SAMPLER and 
KARAOKE modes by swiping your 
hand over GESTURE CONTROL on 
the unit.

Note

Do not touch or bring your hand into 
contact with GESTURE CONTROL when 
you perform the swiping motion.

Swipe your hand over 
GESTURE CONTROL in 6 directions 
as follows.

Swiping motion

Swipe in this 

direction

Right to left
Left to right
Bottom to top
Top to bottom
Clockwise
Counterclockwise

To activate gesture control

Press GESTURE ON/OFF, and 
then press the mode you want 
(PLAYBACK, DJ, SAMPLER, or 
KARAOKE).
The GESTURE ON/OFF indicator 
lights up.

To deactivate gesture control

Press GESTURE ON/OFF.
The GESTURE ON/OFF indicator 
turns off.

Using gesture control 

during playback

You can use gesture control to 
control basic playback when playing 
music from a disc, USB device, or 
BLUETOOTH device.
Use the buttons and 
GESTURE CONTROL on the top panel 
of the unit to perform the following 
operations.

1 

Press GESTURE ON/OFF.

The 

GESTURE ON/OFF

 indicator 

lights up.

2 

Press PLAYBACK.

The PLAYBACK mode is selected.

3 

Press FUNCTION repeatedly to 
select the function you want.

4 

Swipe your hand over 
GESTURE CONTROL.

To

Swipe in this 

direction

Go backward
Go forward
Play
Stop
Increase the 
volume
Reduce the 
volume

Summary of Contents for MHC-V41D

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands