MHC-GZR99D/GZR88D/GZR77D.GB.4-143-232-11(1)
99
GB
O
ther Oper
ations
5
Use the same procedure as in
step 4 to set the time to stop
playback or recording.
6
Select the sound source when
using Play Timer, or prepare the
tape (except for Latin American
models) or the USB device when
using Rec Timer.
For Play Timer:
Press
or
repeatedly until the
desired sound source appears, and
then press ENTER. The display shows
the timer settings.
For Rec Timer:
The display shows the timer settings.
When recording to a tape, perform
steps 1 through 5 of “Recording onto
a tape (except for Latin American
models)” (page 71).
When you record on both sides, be
sure to start from the front side. If you
start from the reverse side, recording
stops at the end of reverse side.
When recording to a USB device,
perform steps 1 and 2 of “Playing a
file of the USB device” (page 82).
7
Press
to turn off the system.
When you set the Rec Timer, the
system turns on 90 seconds before
the preset time. When you set the
Play Timer, the system turns on 30
seconds before the preset time.
If the system is on at the preset time,
the Play Timer and the Rec Timer will
not play. Do not operate the system
from the time the system turns on
until the playback or recording starts.
To check the setting
1
Press TIMER MENU.
“TIMER SELECT?” flashes in the
display.
2
Press ENTER.
3
Press
or
repeatedly to select
“PLAY SELECT?” or “REC SELECT?.”
4
Press ENTER.
To change the setting
Start over from step 1.
Continued
Summary of Contents for mhc-gzr77d
Page 1: ......
Page 11: ...11GB Guide to parts and controls MHC GZR77D Continued ...
Page 151: ...Additional Information 151GB ...
