![background image](http://html.mh-extra.com/html/sony/mhc-gt3d/mhc-gt3d_operating-instructions-manual_1330034051.webp)
51
GB
A
d
d
iti
o
n
a
l I
n
fo
rmat
io
n
filename[D:\NORM'S JOB\SONY HA\SO150006\MHC-GT3D (PMRF
03)\4562957132_GB (CEK)\090INF.fm]
masterpage:Right
model name [MHC-GT3D]
[4-562-957-
13
(2)] GB
Setting the automatic
standby function
The system enters standby mode
automatically in about 15 minutes
when there is no operation or audio
signal output.
By default, the automatic standby
function is turned on.
1
Press OPTIONS.
2
Press
/
repeatedly to select
“AutoSTBY”, then press
.
3
Press
/
repeatedly to select
“ON” or “OFF”.
To exit the options menu, press
OPTIONS.
“AutoSTBY” flashes in the display panel
about 2 minutes before entering
standby mode.
The automatic standby function does
not work in the following cases:
during tuner function.
when the timer is activated.
when microphone is connected.
Updating the software
The software of this system may be
updated in the future. You can update
the software from the websites below.
For customers in Latin America:
<http://esupport.sony.com/LA>
For customers in Europe and Russia:
<http://www.sony.eu/support>
For customers in other countries/
regions:
<http://www.sony-asia.com/support>
Follow the online instructions to update
the software.
Troubleshooting
Should you encounter a problem with
your system, find your problem in the
troubleshooting checklist below and
take the corrective action.
If the problem persists, consult your
nearest Sony dealer.
Note that if the service personnel
changes some parts during repair,
these parts may be retained.
General
The power does not turn on.
Check that the AC power cord (mains
lead) is connected securely.
The system has entered standby
mode.
This is not a malfunction. The system
enters standby mode automatically
in about 15 minutes when there is no
operation or audio signal output
(page 51).
Notes
Additional Information
If “PROTECTX” (X is a
number) appears in the
display panel
Immediately unplug the AC
power cord (mains lead), and
check the following items.
Is anything blocking the
ventilation holes of the
subwoofer?
Is the USB port short-circuited?
Are the speaker cords of the
speaker system connected to the
subwoofer properly?
After checking the above items and
fixing any problems, plug in the AC
power cord (mains lead) again and
turn on the system. If the issue
persists, consult your nearest Sony
dealer.