![background image](http://html.mh-extra.com/html/sony/mhc-gt3d/mhc-gt3d_operating-instructions-manual_1330034043.webp)
43
GB
filename[D:\NORM'S JOB\SONY HA\SO150006\MHC-GT3D (PMRF
03)\4562957132_GB (CEK)\070TUN.fm]
masterpage:Right
BL
U
E
T
O
O
T
H
model name [MHC-GT3D]
[4-562-957-
13
(2)] GB
Setting the BLUETOOTH
audio codecs
You can receive data in AAC or SBC
codec format from a BLUETOOTH
device.
1
Press OPTIONS.
2
Press
/
repeatedly to select
“BT AAC”, then press
.
3
Press
/
repeatedly to select
the setting.
ON: Enable reception in AAC
codec format.
OFF: Receive in SBC codec format.
To exit the options menu, press
OPTIONS.
You can enjoy high quality sound if the
AAC is selected. In case you cannot
listen to AAC sound from your device or
the sound is interrupted, select “OFF”.
If you change this setting when the
system is connected to a BLUETOOTH
device, the BLUETOOTH device will be
disconnected. To connect to the
BLUETOOTH device, perform the
BLUETOOTH connection again.
Setting the BLUETOOTH
standby mode
The BLUETOOTH standby mode
enables the system to turn on
automatically when you establish the
BLUETOOTH connection from a
BLUETOOTH device.
1
Press OPTIONS.
2
Press
/
repeatedly to select
“BT STBY”, then press
.
3
Press
/
repeatedly to select
the setting.
ON: The system turns on
automatically when you establish
a BLUETOOTH connection from a
BLUETOOTH device.
OFF: Turns off this function.
To exit the options menu, press
OPTIONS.
Setting the BLUETOOTH
signal
You can connect to the system from a
paired BLUETOOTH device in all
functions when BLUETOOTH signal is
set to on. The BLUETOOTH signal is
turned on by default.
Use the buttons on the subwoofer to
perform this operation.
Hold down ENTER and
+ for about
3 seconds.
“BT ON” or “BT OFF” appears in the
display panel.
You cannot perform the following
operations when BLUETOOTH signal is
set to off:
Pairing and/or connecting with
BLUETOOTH device
Erasing the pairing information
Using “SongPal” via BLUETOOTH
Change the BLUETOOTH audio codecs
If you touch the system with an NFC-
compatible smartphone or set the
BLUETOOTH standby mode to on, the
BLUETOOTH signals will set to on
automatically.
Notes
Notes