![background image](http://html.mh-extra.com/html/sony/mhc-gnz5d/mhc-gnz5d_operating-instructions-manual_1330004010.webp)
10
GB
5
Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Note
Keep the antennas away from the speaker cords.
6
Connect the video input jack of your TV
to the VIDEO OUT jack with the
supplied video cable.
When using a TV
Turn on the TV and select the video input so that you
can view the pictures from this system.
When connecting a video deck
Connect the TV and the video deck using video and
audio cords (not supplied) as shown below.
If the picture has disturbance or there is noise in the
audio when a TV, a video deck and this system are all
connected at the same time, disconnect one of them.
Note
Do not place the TV on this system.
Tip
For even higher quality video images (except for
MHC-GNZ5D):
– Use an optional component video cord to connect the
COMPONENT VIDEO input jacks on your TV to
the COMPONENT VIDEO OUT jacks of this
system. If your TV is compatible with progressive
format file signals, use this connection and set
“PROGRESSIVE AUTO” or “PROGRESSIVE
VIDEO” depending on your TV. For details, see
“To change the type of signal output from the
system” (page 40).
– You can use an optional S video cord to connect the
S VIDEO input jack on your TV to the S VIDEO
OUT jack.
7
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage. The voltage
selector is located at the bottom of the
unit.
Depending on the model, the VOLTAGE
SELECTOR may differ.
* Saudi Arabian model: 120 – 127 V
8
Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press
?/1
, the system turns on
and the demonstration automatically ends.
If the supplied adapter on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adapter).
AM
FM
75
COAXIAL
AM loop antenna
Extend the FM lead antenna horizontally
VIDEO
OUT
S VIDEO
OUT
TV
Video deck
System
220V
120V
*
230-240V
VOLTAGE SELECTOR