![background image](http://html.mh-extra.com/html/sony/mhc-gnz333d/mhc-gnz333d_operating-instructions-manual_1330003084.webp)
MHC-GNZ444D/GNZ333D/GNZ333DL.GB.3-106-465-14(1)
4
GB
The angles cannot be changed.
Multi-angles are not recorded on the
DVD VIDEO being played back.
The DVD VIDEO prohibits changing
the angles.
Tuner
The radio presetting is canceled.
The power cord is disconnected or a
power failure occurred for longer than
a day. Redo “Listening to a preset radio
station” (page 59).
There is severe hum or noise.
(“TUNED” or “ST” flashes in the
display)
Set the proper band and frequency
(page 59).
Connect the antenna properly
(page 19).
Find a place and an orientation that
provide good reception, then set up
the antenna again. If you cannot obtain
good reception, we recommend that
you connect a commercially available
external antenna.
The supplied FM lead antenna receives
signals along its entire length, so make
sure you extend it fully.
Locate the antennas as far away from
the speaker cords as possible.
Try turning off the surrounding
electrical equipment.
A stereo FM program cannot be
received in stereo.
Press REPEAT/FM MODE
repeatedly until “MONO” disappears
from the display.
Tape deck
The tape does not record or
playback, or there is a decrease in
sound level.
The tape heads are dirty (see “Cleaning
the tape heads” (page 90)).
The record/playback heads are
magnetized (see “Demagnetizing the
tape heads” (page 90)).
The tape does not erase completely.
The record/playback heads are
magnetized (see “Demagnetizing the
tape heads” (page 90)).
There is excessive wow or flutter, or
the sound drops out.
The capstans or pinch rollers are dirty
(see “Cleaning the tape heads” (page
90)).
Noise increases or the high
frequencies are erased.
The record/playback heads are
magnetized (see “Demagnetizing the
tape heads” (page 90)).