MHC-GN88D 4-248-439-
12
(1)
Getting Started
11
GB
When connecting a video deck
Connect the video deck to the TV using an
audio/video cord (not supplied). However, do
not connect this system to the TV through the
video deck. Otherwise, you may experience
video leakage when watching video from this
system. Connect this system directly to the TV
as shown below.
Tip
For even higher quality video images:
– Use an optional component video cables to connect
the COMPONENT VIDEO input jacks on your TV
to the COMPONENT VIDEO OUT jacks of this
system. If your TV is compatible with progressive
format file signals, use this connection and set
“COMPONENT OUT” to “PROGRESSIVE” in
“Adjusting the TV screen” (page 30).
– You can use an optional S Video cord to connect
the S VIDEO input jack on your TV to the S
VIDEO OUT jack of this system.
Gray/Solid
(
3
)
Black/Stripe (
#
)
3
Connect the center speaker.
Connect the speaker cords to the CENTER
SPEAKER terminals.
Insert only the stripped portion
R
L
4
Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
5
Connect the video input jack of your TV
to the VIDEO OUT jack with the
supplied video cable.
When using a TV
Turn on the TV and select the video input so
that you can view the pictures from this system.
Gray
Video deck
System
Do not connect
directly
TV
FM75
Ω
COAXIAL
AM
S VIDEO
OUT
VIDEO
OUT
COMPONENT
VIDEO OUT
AM loop antenna
Extend the FM lead
antenna horizontally
continued