![background image](http://html.mh-extra.com/html/sony/mhc-gn100d/mhc-gn100d_operating-instructions-manual_1329993044.webp)
44
GB
5
Press TUNER MEMORY.
A preset number flashes in the display.
The stations are stored from preset
number 1.
6
Press /– repeatedly (or turn
–
. >
+ clockwise or
counterclockwise on the unit) to select
the preset number you want.
7
Press ENTER.
“Complete!” appears in the display. The
station is stored.
8
Repeat steps 2 to 7 to store other
stations.
Other operations
To improve tuner reception
When tuner reception is poor, set the DVD
power manage function to “DVD POWER
OFF”. The default setting is “DVD POWER
ON”.
Use buttons on the unit for the operation.
1
Press DVD.
2
Press
?/1
to turn off the system.
3
Press
?/1
while holding down
x
.
The system turns on automatically and “DVD
POWER OFF” appears in the display.
To set “DVD POWER ON”
Repeat the procedure above and “DVD POWER
ON” appears in the display.
Notes
• When “DVD POWER OFF” is selected, disc access
time is increased.
• You cannot change the DVD power manage setting
in the Power Saving Mode (page 60).
To change the AM tuning interval
(except for Saudi Arabian
models)
Use buttons on the unit for the operation.
The factory settings for AM tuning interval is
9 kHz (or 10 kHz for some areas). To change the
AM tuning interval, select any AM station first,
then turn off the system. While holding down
ENTER, press
?/1
to turn on the system. “AM
STEP 9k” or “AM STEP 10k” appears in the
display. When you change the interval, all the
AM preset stations are erased. To reset the
interval, repeat the same procedure.
Note
You cannot change the AM tuning interval in the
Power Saving Mode (page 60).
Tips
• The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
• If you press TUNER/BAND on the unit while the
system is turned off, the system turns on
automatically and TUNER is selected as the
function.
To
Do this
Tune in a station
with a weak signal
Follow the procedure described
in “Manual tuning preset”
(page 43).
Stop scanning
during automatic
tuning
Press TUNING MODE.
Cancel presetting
Press TUNER MEMORY.
MANUAL
GROOVE
EFFECT
j
Y
Y
A
B
Preset number