![background image](http://html.mh-extra.com/html/sony/mhc-g330/mhc-g330_operating-instructions-manual_1329990017.webp)
Chapter 4: the Tape Player
17
7
Repeat steps 5 and 6 from the same CD
and 4 to 6 from another CD to program
the remaining tracks you want to record
on side A in the order you want them to
be recorded.
8
Press
on the remote to pause
recording at the end of side A.
“P” appears in the display. The total
playing time “0.00” is displayed.
9
Repeat steps 5 and 6 from the same CD
and 4 to 6 from another CD to program
the remaining tracks you want to record
on side B in the order you want them to
be recorded.
10
Press
p6
and insert a blank tape into
deck B with the side you want to record
on facing forward.
Recording will start from the front side
of the tape.
Make sure the tabs on the cassette have
not been removed.
11
Press
P
and then press
r
(
·
is
linked and depressed at the same time)
on deck B.
Be sure to press the button firmly and
swiftly.
Deck B stands by for recording.
12
Press
P
on deck B again to release
recording pause.
Recording starts.
13
Press
fl
on the CD player.
The determined tracks for side A starts
playing and are recorded. After those
tracks have been recorded, the unit will
pause.
14
Set the tape to the beginning of side
B.
Take the tape out and insert the tape
with side B facing forward.
15
Press
P
and then press
r
(
·
is
linked and depressed at the same time)
on deck B.
Be sure to press the button firmly and
swiftly.
Deck B stands by for recording.
16
Press
P
on deck B again to release
recording pause.
Recording starts.
17
Press
fl
on the CD player.
The determined tracks for side B starts
playing and are recorded.
To stop recording
Press
p6
on deck B.
To check the order
Press CHECK on the remote repeatedly.
Each time you press CHECK, the number
of the programmed tracks appear in the
display.
To cancel program edit
Press PLAY MODE repeatedly until
“PROGRAM” disappears from the display.
To activate DOLBY NR
When you want to reduce the hiss noise in
low-level high-frequency signals, press
DOLBY NR so that “DOLBY NR B” appears
in the display after step 10.
Recording From the
Radio
You can record from the tuner onto a tape.
Use TYPE I (normal) or TYPE II (CrO
2
)
tape.
1
Press
p6
and insert a blank tape into
deck B with the side you want to record
on facing forward.
Recording will start from the front side
of the tape.
Make sure the tabs on the cassette have
not been removed.
2
Press TUNER/BAND several times until
the desired radio band appears.
3
Tune in the radio station you want to
record. (See “Listening to the Radio”, or
“Playing Preset Radio Stations” for
details.)
4
Press
P
and then press
r
(
·
is linked
and depressed at the same time) on deck
B.
Be sure to press the button firmly and
swiftly.
Deck B stands by for recording.
5
Press
P
on deck B again to release
recording pause.
Recording starts.
Recording a CD:
Specifying Track
Order (program edit)
You can adjust the total recording time to
the tape length while making a program.
Use the buttons on both the unit and the
remote to do this operation.
1
Press FUNCTION repeatedly until
“CD” appears in the display.
2
Press
§
OPEN/CLOSE and place a CD.
Then, press
§
OPEN/CLOSE again to
close the disc tray.
If the button for the disc tray containing
the CD you want to record is not lit
green, press DISC SKIP EX-CHANGE
repeatedly so that it lights green.
3
Press PLAY MODE repeatedly until
“PROGRAM” appears in the display.
4
Press DISC 1 – 3 to choose a CD.
5
Press
or
on MULTI
CONTROLLER (or press
or
on
the remote) to choose a track.
6
Press ENTER/NEXT.
The chosen track number lights up in
the music calendar and is memorized. If
the track number disappears before you
press ENTER/NEXT, go back to step 5.
POWER
n
ON
3
2
5
1
14
p
DISC SKIP EX-CHANGE
13,
17
DOLBY NR
6
4
10
11,12
15,16
r ·
POWER
n
ON
2
4,5
1
DOLBY NR
r ·
continue to next page
➔
8,13
CHECK
1
4
2