![background image](http://html.mh-extra.com/html/sony/mg110/mg110_operating-instructions-manual_1329911011.webp)
Getting Started
11
Adjusting the speaker volume
of each speaker
— Test tone
1
Press PRO LOGIC.
“DOLBY PL ON” appears.
2
Press TEST TONE on the remote.
The test tone is heard from the speakers in
the following order.
Front (left)
t
Center
t
Front (right)
t
Rear
t
Front (left)
t
…
3
From your listening position, press
CENTER (+/–) and REAR (+/–) on the
remote to adjust the volume until the
each volume level becomes the same.
4
Press TEST TONE when you finish
adjusting.
The test tone turns off.
Note
The test tone feature works only for Dolby Pro Logic
Surround sound.
Setting the time
1
Turn on the system.
2
Press TIMER SET.
When you set the clock for the first time, go
to step 5.
3
Press –
.
or
>
+ repeatedly to
select “CLOCK SET”.
4
Press ENTER.
5
Press –
.
or
>
+ repeatedly to set
the hour.
6
Press ENTER.
7
Press –
.
or
>
+ repeatedly to set
the minute.
8
Press ENTER.
Tip
If you made a mistake or want to change the time,
start over from step 1.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.