47
Adjusting the equalizer curve
You can adjust and store the equalizer settings
for frequency and level.
1
Press
(SOURCE)
to select a source.
2
Press the L dial, then rotate the L dial
to select “EQ7.”
3
Press the L dial.
4
Rotate the L dial to select the desired
equalizer curve, then press
(F2)
(TUNE).
5
Press the L dial repeatedly to select
the desired frequency.
Each time you press the L dial, the frequency
changes as follows:
62Hz
t
157Hz
t
396Hz
t
1.0kHz
t
2.5kHz
t
6.3kHz
t
16kHz
t
62Hz
6
Rotate the L dial to adjust the level.
The level is adjustable between
–10 to +10 steps.
7
Press
(F3)
(
).
The normal display appears.
To restore the default setting
Press
(F2)
(INIT) in step 5.
Adjusting the bass and treble
— BAS/TRE
1
Press
(SOURCE)
to select a source.
2
Press the L dial.
The sound list display appears.
3
Rotate the L dial to select “BAS” or
“TRE,” then press the L dial.
4
Rotate the L dial to adjust the level.
The bass/treble level is adjustable between
–10 to +10 steps.
5
Press the L dial.
The normal display appears.
Note
If DSO is set to “On,” or EQ7 is selected, the effects of
BASS and LOUD may be hard to be recognized.
SOURCE
L dial
