Sony MEU-WX1, Operating Instructions Manual

Page: 31 / 34

Specifications
31
Computer audio input jack
Stereo mini jack (1), –5 dBu, 47
kilohms or higher
Optional input slot
2 slots
Signal format:
H: 15 to 45 kHz
V: 48 to 60 Hz
DC IN connector DC12V (output impedance 0.05
Ω
or less)
Output
Video output connectors
BNC type (3) Loop-through, with
75 ohms automatic terminal
function
Audio monitor output connector
Stereo mini jack (1)
External synchronized output connector
BNC type (1) Loop-through, with
75 ohms automatic terminal
function
DISPLAY SIGNAL OUT connector
For exclusive use
DISPLAY DC OUT connector
DC16.5V (on AC power supply)
DC 12V (on DC power supply)
(Available model: see 8 on
page 14)
Built-in speaker output
More than 0.5W+0.5W (stereo)
General
Power DC12V, 5.1 A (LMD-150/LMD-
170W/LMD-171W)
AC100 to 240 V, 50/60 Hz,
1.5 A
- 0.6 A
Power consumption
Maximum: approx. 115 W (when
LMD-210 and two BKM-255DV
are connected)
Peak inrush current
(1) Power ON, current probe method:
75 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
52 A (230 V)
Dimensions
Approx. 434 × 44 × 305 mm (not
including the projection parts)
(17
1
/
8
× 1
3
/
4
×12
1
/
8
inches)
(w/h/d)
Mass Approx. 4.5 kg (9 lb 15 oz)
Operating conditions
Temperature 0 °C to 35 °C (32 °F to 95 °F)
Recommended temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity 30% to 85% (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature –10 °C to 40 °C (14 °F to 104 °F)
Humidity
0% to 90%
Pressure 700 hPa to 1060 hPa
Accessories supplied
AC power cord (1)
AC plug holder (1)
Mounting bracket (2)
Screw (4)
Operating Instructions (1)
CD-ROM (1)
Warranty Card (1)
Using the CD-ROM Manual (1)
Optional accessories
SDI 4:2:2 input adaptor
BKM-220D
HD/D1-SDI input adaptor
BKM-243HS
DV input adaptor
BKM-255DV
Display IF cable (10 m, 393
3
/
4
in.)
SMF-600
Design and specifications are subject to change without
notice.
Pin assignment
PARALLEL REMOTE terminal
Modular connector
(8-pin)
You can allocate functions using the REMOTE menu
(see page 29). When the function is assigned to a
monitor without a tally lamp (LMD-320W), the function
does not work.
Wiring required to use the Remote Control
Connect the function you want to use with a Remote
Control to the Ground (Pin 5).
Pin number Functions
1 Designating COMPOSITE input signal
2 Designating COMPUTER input signal
3 Setting tally lamp red ON/OFF
4 Setting tally lamp green ON/OFF
5 GND
6 Selecting external sync.
7 Selecting zero scan
8 Selecting aspect ratio 16:9
1 8