Sony MDX-C670, Operating Instruction

Page: 8 / 48

8
EN
If you cannot tune in a preset
station
Press either side of (SEEK/AMS)
momentarily to search for the station
(automatic tuning).
Scanning stops when the unit receives a
station. Press either side of
(SEEK/AMS)
repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(SHIFT) , then press (3) (PLAY MODE) repeatedly until
“Local” (local seek mode) is displayed. Then press (4)
( n ) to select “Local on”. Press (SHIFT) .
Only the stations with relatively strong signals will be
tuned in.
Tip
If you know the frequency of the station you want to listen
to, press and hold either side of
(SEEK/AMS) until the
desired frequency appears (manual tuning).
If FM stereo reception is poor
— Monaural Mode
1
Press
(SHIFT)
, then press
(3)
(PLAY
MODE) repeatedly until “Mono” is
appears.
2
Press (4) ( n ) repeatedly until “Mono
on“ appears.
The sound improves, but becomes
monaural (“ST” disappears).
3
Press
(SHIFT)
.
To go back to the normal mode, select
“Mono off” in step 2 above.
Changing the displayed items
Each time you press (DSPL) , the items changes
as follows:
Frequency
˜
Clock
Memorising only the
desired stations
You can store up to 10 stations on each band
(20 for FM1 and FM2, 10 for AM (or AM1 and
AM2)
*
) in the order of your choice.
1
Press (SOURCE) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select the
band (FM1, FM2 or AM (AM1, AM2) * ).
3
Press either side of
(SEEK/AMS)
to tune
in the station that you want to store on
the number button.
4
Press the desired number button for two
seconds until “MEM” appears.
The number button indication appears in
the display.
*
When you set the frequency select switch to the 9K
position.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
Receiving the memorised
stations
1
Press
(SOURCE)
repeatedly to select the
tuner.
2
Press
(MODE)
repeatedly to select the
band (FM1, FM2 or AM (AM1, AM2) * ).
3
Press the number button ( (1) to (10) )
momentarily where the desired station is
stored.
* When you set the frequency select switch to the 9K
position.