Sony MDS-JA50ES / Mode d’emploi, Service Manual

Page: 26 / 98

— 26 —
SECTION 3
DISASSEMBLY
Note :
Follow Xthe disassembly procedure in the numerical order given.
3-1. TRAY ASSEMBLY
1
Rotate the pulley gear in the arrow
direction
A
, and pull out the tray
assembly.
2
Two screws
(BVTP 3x6)
3
Two screws
(BVTP 3x6)
6
Two gear
(Gear 4)
7
Screw
(BVTT 3x6)
9
Shaft
0
Remove the tray assembly
in the arrow direction
B
.
A
B
Bracket (TOP)
Note:
When attaching the bracket (TOP), attach while
pressing the switch as shown in the figure.
• Precautions on Attaching
(Assemble in the reverse order of removal.)
Slider assembly
When attaching the tray assembly, first move the slider
assembly in the arrow direction
B
and set Pin
A
at the
position shown.
When attaching gear 4 (two in front), pull the tray
assembly in arrow direction
A
completely, and
position racks (L), (R) and (D) as shown in the
figure.
Rack (L)
Gear 4
Rack (D)
Hole
A
B
5
Two gear
(Gear 4)
8
Stopper
(Shaft A)
Pin
A
4
Bracket
(TOP)