17
mode, because it does not synchronized with input signals.
When digital input is correct, it synchronizes with input signals in 200
mSec at latest. So, first send “REC” command, and send “STATUS”
command after 200 mSec to check whether input is locked, then start
recording.
Example of transmission packet
:
Enter recording pause mode to start recording.
7EH, 07H, 05H, 47H, 02H, 21H, FFH
6.14
TIME MACHINE REC
Function
:
To start time machine recording
Data length
:
2 bytes
Data
:
02H, 28H
Details of function
:
This command has the same function when T.REC key in the re-
mote control is pressed.
When this command is sent in recording pause mode, recording
starts from the point before 6 seconds at most within the input sounds.
In time machine recording, as only the sounds after the unit enters
recording pause mode can be recording, when this command is sent
in 6 seconds, recording starting point goes back in time of less than
6 seconds.
When this command is sent in recording pause mode, “IMPOSSIBLE”
is sent back instead of “REC”.
As “STATUS” is correctly in REC, refer to the value of “STATUS” to
check whether time machine recording has started or not.
Example of transmission packet
:
Start time machine recording from recording pause mode.
7EH, 07H, 05H, 47H, 02H, 28H, FFH
6.15
EJECT
Function
:
To eject a disc
Data length
:
2 bytes
Data
:
02H, 40H
