Sony MCE-F500, Operating Instructions Manual

Page: 30 / 33

SONY MCE-F500 (E, C1, C2) 3-858-463-11
Actual page number:
27 EN
Additional Information
Glossary
Auto Pause
Automatic pause function that works according to the
signal encoded on the disc during PBC playback. In
this case, “AUTO
P
” appears in the front panel
display. If the player doesn’t resume play for a long
time, press
P or · to resume play manually.
PBC Playback
Playback using the menu screens recorded on VIDEO
CDs with PBC functions. You can enjoy simple
interactive operations using the PBC Playback
function.
Playback Control (PBC)
Signals encoded on VIDEO CDs (Version 2.0) to
control playback.
By using menu screens recorded on VIDEO CDs with
PBC functions, you can enjoy playing simple
interactive software, software with search functions,
and so on.
When you insert a VIDEO CD with PBC functions on
this player, “PBC” appears in the front panel display.
Track
Sections of a picture or a music piece on a disc. Each
track is assigned with a track number to locate the
track you want.
VIDEO CD
A compact disc that contains moving pictures.
The picture information uses the MPEG 1 format, one
of the world wide standards of digital compact
technology. The picture information is compressed
about 120 times. Consequently, a 12 cm VIDEO CD can
contain up to 74 minutes of moving pictures.
VIDEO CDs also contain compact audio information.
Sounds outside the range of human hearing are
compressed while the sounds we can hear aren’t
compressed. VIDEO CDs can hold 6 times the audio
information of conventional audio CDs.
There are 2 versions of VIDEO CDs.
• Version 1.1: You can play only moving pictures and
sounds.
• Version 2.0: You can play high-resolution still
pictures and enjoy PBC functions.
This player conforms to both versions.
Specifications
VIDEO CD player
Laser Semiconductor laser
Wavelength 780 – 790 nm
Signal format system NTSC, PAL
Frequency response 2 Hz to 20 kHz ±0.5 dB
Signal-to-noise ratio More than 94 dB
Outputs
AUDIO OUT
DIGITAL OUT
(OPTICAL)
VIDEO OUT
S VIDEO OUT
PHONES
General
Power requirements
110 – 120 V or 220 – 240 V AC,
adjustable, 50/60 Hz
Power consumption 22 W
Dimensions (approx.)
430
×
95
×
278 mm
(w/h/d) incl. projecting parts
Mass (approx.)
3.7 kg
Supplied accessories
Audio and video connecting cord (3 phono plugs – 3
phono plugs) (1)
Remote commander (remote) RMT-F500V (1)
Sony SUM-3 (NS) batteries (2)
Plug adaptor (1)
Design and specifications are subject to change without notice.
Jack
type
Phono
jacks
Optical
output
connector
Phono
jack
4-pin mini
DIN
Phone
jack
Maximum
output
level
2 V
(at 50 kilohms)
–18dBm
1 Vp-p
Y: 1 Vp-p
C: 0.286 Vp-p
10mW
Load impedance
Over 10 kilohms
Wave length: 660nm
75 ohms, unbalanced,
sync negative, white
peak
75 ohms, unbalanced,
sync negative
32 ohms