Sony Mavica MVC-FD85, Service Manual

Page: 63 / 112

5-9
Address
A1
A2
A3
A4
A5
A6
A7
A8
A9
AA to CF
D0
D1
D2
D3
D4
D5
D6
D7
D8
D9
DA
DB
DC
DD
DE
DF to FF
FD85
20
60
A0/80
(*2)
90/80
(*2)
D0
90
80
70/80
(*2)
A0/80
(*2)
72
9A
90/60
(*2)
Remark
Fixed data-2 (Modified data. Copy
the data built in the same model.)
Fixed data-1 (Initialized data)
Fixed data-2 (Modified data. Copy
the data built in the same model.)
Fixed data-1 (Initialized data)
Fixed data-2 (Modified data. Copy
the data built in the same model.)
Fixed data-1 (Initialized data)
Bright adj. (LCD)
*3: LCD TYPE SH/ LCD TYPE CA
Color adj. (LCD)
*3: LCD TYPE SH/ LCD TYPE CA
White balance adj. (LCD)
*2: LCD TYPE SA/ LCD TYPE ST
*3: LCD TYPE SH/ LCD TYPE CA
Contrast adj. (LCD)
*3: LCD TYPE SH/ LCD TYPE CA
Black limit adj.(LCD)(FD85),
D range adj.(LCD)(FD90)
*3: LCD TYPE SH/ LCD TYPE CA
VG center adj.(LCD)(FD85)
V-COM level adj.(LCD)(FD90)
*3: LCD TYPE SH/ LCD TYPE CA
VCO adj. (LCD)(NTSC)
*2: LCD TYPE SA/ LCD TYPE ST
V-COM adj.(LCD)
*2: LCD TYPE SA/ LCD TYPE ST
*3: LCD TYPE SH/ LCD TYPE CA
Fixed data (DC BL LEVEL (LCD))
*3: LCD TYPE SH/ LCD TYPE CA
Fixed data-1 (Initialized data)
Fixed data (AC BL LEVEL (LCD))
*3: LCD TYPE SH/ LCD TYPE CA
VCO adj. (LCD)(PAL)
*2: LCD TYPE SA/ LCD TYPE ST
*3: LCD TYPE SH/ LCD TYPE CA
Fixed data-2 (Modified data. Copy
the data built in the same model.)
Fixed data-1 (Initialized data)
FD90
AA/B2
(*3)
66/60
(*3)
A8/A0
(*3)
7A/6A
(*3)
B8/C0
(*3)
B0/54
(*3)
7C/8A
(*3)
6F
74/8A
(*3)
73/5F
(*3)
B5/9A
(*3)
6F/4F
(*3)
Initial value
Table. 5-1-2.
1-2-2. Initializing the B, E, F, 7 Page Data
1. Initializing the B, E, F, 7 Page Data
Note 1: If “Initializing the B, E, F, 7 Page Data” is performed, all data of
the B page, E page, F page and 7 page will be initialized. (It is
impossible to initialize a single page.)
Note 2:
If the B, E, F, 7 Page data has been initialized, “Modification of B,
E, F, 7 Page Data” and following adjustments need to be performed
again.
1) Video system adjustments
2) Camera system adjustments
Adjusting page F
Adjusting Address 10 to FF
Adjusting page 7
Adjusting Address 00 to FF
Adjusting page E
Adjusting Address 00 to FF
Adjusting page B
Adjusting Address 00 to FF
Initializing Method:
1)
Select page: 0, address: 01, and set data: 01.
2) Select page: 6, address: 03, and set the following data.
05: MVC-FD85
04: MVC-FD90
3) Select page: 6, address: 00, and set data: 2D.
4) Select page: 6, address: 01, set data: 2D, and press the PAUSE
button.
5) Select page: 6, address: 02, and check that the data changes to
“01”.
6) Perform “Modification of B, E, F, 7 Page Data”.
2. Modification of B, E, F, 7 Page Data
If the B, E, F, 7 Page data has been initialized, change the data of
the “Fixed data-2” address shown in the following tables by manual
input.
Modifying Method:
1)
Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note:
If copy the data built in the different model, the camera may
not operate.
3) When changing the data, press the PAUSE button of the
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Processing after Completing Modification of B, E, F, 7 Page data
1)
Select page: 2, address: 00, and set data: 29.
2) Select page: 2, address: 01, and set data: 29, and press the
PAUSE button of the adjustment remote commander.