Cha
p
te
r 3
P
rep
a
ra
tions
3-4 Setup
3-19 (E)
Basic menu items
Item number Display indication
Settings
001
BI
PREROLL TIME
This item sets the pre-roll time when performing editing from the BKMA-505.
0 ..
.. 15 seconds
002 *
BI
CHARACTER H-POSITION
Set the horizontal position of timecode and other superimposed text information output
from the MONITOR OUT terminals of the SDI (SUPER) and ANALOG COMPOSITE
(SUPER) terminals. The value 00 ..
.. 31:00 corresponds to the distance from the left
edge of the screen: incrementing the value by one moves the displayed text one character
position to the right.
003 *
BI
CHARACTER V-POSITION
Set the vertical position of timecode and other superimposed text information output
from the MONITOR OUT terminals of the SDI (SUPER) and ANALOG COMPOSITE
(SUPER) terminals. The value 00 ..
.. 12:00 corresponds to the distance from the top
edge of the screen: incrementing the value by one moves the displayed text down one
line.
005
BI
DISPLAY INFORMATION
SELECT
Select the information superimposed on the output from the SDI (SUPER) and
ANALOG COMPOSITE (SUPER) connectors when the CHARACTER switch on the
system setup panel is set to ON.
: Time data information and operating status
time & UB : Time data information and user bits
time only
: Time data only
time & TM1: Time data information and TM1
time & TM2: Time data information and TM2
006
BI
LOCAL FUNCTION ENABLE
Select which buttons on the control panel of this unit can be operated when being
remotely controlled by another device.
: All buttons and switches are disabled.
stop
: Only the STOP button operates.
all enable
: All controls operate.
007
BI
POSTROLL TIME
This item sets the post-roll time when performing editing from the BKMA-505.
0 ..
.. 15 seconds
008
BI
ANALOG MONITOR
SUPERIMPOSE
Sets the control method for superimpose data output for MONITOR OUT of ANALOG
COMPOSITE.
: Switches the CHARACTER SW on/off.
inhibit
: Normally not output.
009 *
BI
CHARACTER TYPE
Select the character style of the information superimposed on the output from the SDI
(SUPER) and ANALOG COMPOSITE (SUPER) connectors.
: White characters on black background
black
: Black characters on white background
W/out
: White characters with black outline
B/out
: Black characters with white outline
010
– 525/625
Select the NTSC or PAL standard.
: NTSC
625/50
: PAL
Note:
After changing the settings for this item, all material must be erased using -
ALL ERASE (menu 099).
SUB MENU
EXECUTE
525/625
011 *
BI
CHARACTER V-SIZE
Set the height of timecode and other information superimposed on the output from the
SDI (SUPER) and ANALOG COMPOSITE (SUPER) connectors.
: Normal
X2
: Double height
012
DROP FRAME MODE (WITH
525 OPERATION ONLY)
Select the timecode generator operating mode.
: Drop-frame mode
NDF
: Non-drop-frame mode
Note:
After changing the settings for this item, all material must be erased using -
ALL ERASE (menu 099).
* When setting items 002, 003, 009 and 011, watch the monitor to obtain the desired
condition. (However, if the setting differs from the currently running SETUP BANK,
the location of the character data on the monitor will not change.
5
16
10
time & stat
all disable
5
switch
white
525/60
X1
DF
