Sony LSPX-W1, Operating Instructions Manual

Page: 53 / 91

53
Troubleshooting
E
rr
o
r H
and
ling
3D video images
Others
Symptom Cause and Remedy Page
The video image does not
seem like 3D video
images. Check if the 3D glasses are turned on. 26
Make sure that the battery in the 3D glasses is sufficiently
charged. –
Set “2D-3D Display Sel.” to “Auto” or “3D.” 43
Check if the input signals are compatible 3D signals. 64
The 3D signals may not be input depending on the
specifications of the connected AV selector/AV amplifier/
external equipment. If the 3D signal is not input, confirm
the specifications and/or settings of the AV selector/AV
amplifier/external equipment. –
When the viewing position is too far from the unit, the 3D
glasses may not be able to display the images properly. 26
The projection image size is not appropriate. Set the
zooming magnification to low or watch the image from
farther away from the projection surface. 68
For details, see “Precautions for use” of “Using the 3D
Glasses.” 26
Symptom Cause and Remedy Page
The fan is noisy. Check the setting of “Cooling Setting” on the Setup
menu.
41
Make sure that the room temperature is not too high. –
Check the installation requirements of the unit.
Fan speed increases to maintain the product reliability of the
projector’s components in a room where the temperature is
higher than normal. The fan noise becomes slightly louder
in these rooms. The approximate normal temperature for the
unit is 25°C (77°F). –