Sony LMD-940W, Operating Instructions Manual

Page: 23 / 31

Adjustment Using the Menus
23
FUNCTION BUTTON SETTING
About the function assigned to the
function button
SCAN
Press the button to change the scan size of the picture.
With every press of the button for the 4:3 display, the
picture switches in the sequence NORMAL scan
t
OVER scan
t
NATIVE. With every press of the button
for the 16:9 display, the picture switches in the sequence
NORMAL scan
t
OVER scan
t
FULL screen
t
NATIVE (see “Scan mode image” on page 24).
WFM/ALM
SELECT • WFM : A waveform monitor is
displayed.
• ALM : An audio level meter is
displayed.
When WFM is selected, the waveform
and audio level are displayed. When
ALM is selected, the audio level is
displayed in eight channels.
The audio levels of WFM or ALM are
displayed when SDI signal is input.
Select the displayed audio level channels
in SDI AUDIO SETTING.
The indications of the waveform (only
when WFM is selected) and audio level
signify as illustrated below, although the
percentage of the waveform, units and
values of the scale for the audio level do
not appear on the display.
When WFM is selected
When ALM is selected
Submenu Setting
-4%
0%
25%
50%
75%
100%
0
OVER
(dB)
-10
-20
-30
-60
1 2
109%
Audio level Waveform
Channel number
(The channel number which is selected in
SDI AUDIO SETTING is displayed.)
0
(dB)
-10
-20
-30
-60
OVER
1 2 3 4 5 6 7 8
Audio level
Channel number
(Displayed in eight channels, including the channel
which is selected in SDI AUDIO SETTING.)
POSITION Sets the position of the WFM/ALM
display. You can select from among 1 to
4.
•
1 : Bottom left
• 2 : Bottom right
• 3 : Top right
• 4 : Top left
TRANSPARENCY Selects from black and half (transparent)
for the background of the WFM/ALM
display.
•
BLACK : The background is black.
Displayed image is hidden behind
the background.
• HALF : The background is
transparent. Displayed image can
be seen indistinctly behind the
WFM/ALM display.
Submenu Setting
F1 BUTTON to F7
BUTTON Assigns the function to the function
buttons of the front panel and turns the
function on or off.
You can assign the function from among
SCAN, ASPECT, BLUE ONLY,
MONO, MARKER, I/P MODE and
WFM/ALM.
Factory setting
• F1 button : BRIGHTNESS
• F2 button : CONTRAST
• F3 button : CHROMA
• F4 button : SCAN
• F5 button : H/V DELAY
• F6 button : VOLUME
• F7 button : I/P MODE
Submenu Setting
F 1 B U T T O N : xxxx
F 2 B U T T O N : xxxx
F 3 B U T T O N : xxxx
F 4 B U T T O N : xxxx
F 5 B U T T O N : xxxx
F 6 B U T T O N : xxxx
F 7 B U T T O N : xxxx
USER CONFIG – FUNCTION BUTTON SETTING