background image

2

Owner’s Record

The model and serial numbers are located at the rear. 
Record these numbers in the spaces provided below.
Refer to these numbers whenever you call upon your 
Sony dealer regarding this product.

Model No.____________________
Serial No.____________________

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings.

Install in accordance with the manufacturer's 
instructions.

• Do not install near any heat sources such as radiators, 

heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or 

grounding-type plug.  A polarized plug has two blades 
with one wider than the other.  A grounding-type plug 
has two blades and a third grounding prong.  The wide 
blade or the third prong are provided for your safety.  
If the provided plug does not fit into your outlet, 
consult an electrician for replacement of the obsolete 
outlet.

• Protect the power cord from being walked on or 

pinched particularly at plugs, convenience 
receptacles, and the point where they exit from the 
apparatus.

• Only use attachments/accessories specified by the 

manufacturer.

• Use only with the cart, stand, tripod, 

bracket, or table specified by the 
manufacturer, or sold with the apparatus.  
When a cart is used, use caution when 
moving the cart/apparatus combination to avoid injury 
from tip-over. 

• Unplug this apparatus during lightning storms or 

when unused for long periods of time.

• Refer all servicing to qualified service personnel.  

Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate 
normally, or has been dropped. 

WARNING

To reduce the risk of fire or electric shock, do 
not expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the 
cabinet.  Refer servicing to qualified personnel 
only.

WARNING
THIS APPARATUS MUST BE EARTHED.

WARNING

When installing the unit, incorporate a readily 
accessible disconnect device in the fixed wiring, or 
connect the power plug to an easily accessible socket-
outlet near the unit.  If a fault should occur during 
operation of the unit, operate the disconnect device to 
switch the power supply off, or disconnect the power 
plug.

Attention-when the product is installed in Rack:

1. Prevention against overloading of branch 

circuit

When this product is installed in a rack and is supplied 
power from an outlet on the rack, please make sure that 
the rack does not overload the supply circuit.

2. Providing protective earth

When this product is installed in a rack and is supplied 
power from an outlet on the rack, please confirm that the 
outlet is provided with a suitable protective earth 
connection.

Important Safety Instructions

This symbol is intended to alert the user to 
the presence of uninsulated “dangerous 
voltage” within the product’s enclosure 
that may be of sufficient magnitude to 
constitute a risk of electric shock to 
persons.

This symbol is intended to alert the user to 
the presence of important operating and 
maintenance (servicing) instructions in 
the literature accompanying the 
appliance.

Summary of Contents for LMD-940W
































Reviews: