![background image](http://html.mh-extra.com/html/sony/lbt-zx10d/lbt-zx10d_operating-instructions-manual_1329885012.webp)
12
GB
Notes
• If you place the center speaker on the unit, be sure to
place it at the front side of the unit.
• Always place the sub woofer vertically, keeping it a
few centimeters away from the wall.
• If the sub woofer is placed in the center of a room, the
bass could be extremely weakened. This is due to the
influence of the standing wave of the room. If this
happens, move the sub woofer away from the center
of the room or eliminate the cause of the standing
wave, by placing a bookshelf against the wall, etc.
Speaker settings
To enjoy DVDs and other discs with
multi-channel sound and Dolby surround
effects, the speakers need to be adjusted. Set the
distance from the listening position to the
speakers, and the speaker balance and level.
Then, use the test tone to adjust the volume of
each speaker to the same level.
For details, see “Speaker settings” on page 38.
1
Press
?/1
to turn on the system.
2
Press CLOCK/TIMER SET.
“CLOCK” appears in the display. Then, the
hour indication flashes in the display.
3
Press
V
or
v
repeatedly to set the
hour.
4
Press ENTER.
The minute indication flashes in the
display.
5
Press
V
or
v
repeatedly to set the
minute.
6
Press ENTER.
The clock starts functioning.
To adjust the clock
1
Press CLOCK/TIMER SET.
“SET” appears in the display, then “PLAY
SET?” flashes in the display.
2
Press
V
or
v
repeatedly to select “CLOCK
SET?”, then press ENTER.
The hour indication flashes in the display.
3
Do the same procedures as step 3 to 6
above.
Notes
• The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
• You cannot set the clock in Power Saving Mode
Setting the clock
Summary of Contents for LBT-ZX10D
Page 91: ......