7
6. Service Mode
Chapter 6 - Service Mode
Service Mode Access
1. The TV must be in the Standby Mode as indicated by the front panel red light. Refer to Figure 6-1 for the
location of the standby light. If this Standby light is OFF, plug the TV into AC, press the front panel Power
button and then shut off the TV from the remote control. The Standby light should now be lit (red) while the
TV is OFF.
Standby/sleep
light
TV
Figure 6-1
2. Using a Sony remote control aimed at the TV in the standby mode, quickly press: Display, 5, , Power
ON
and MENU
. If the TV turned ON when 5 was pressed, you did not press the next button fast
enough and will have to try again.
3. The following
new
service Mode menu shown in Figure 6-2 will appear above the user menu. Use the remote
control joystick to move and change the data as before. Store data as in previous service modes, by pressing
“Mute” and then “Enter”.
Figure 6-2 - Service Mode Display
Service
Menu
Normal
User
Menu
