21
8. Plasma Panel Replacement - KZ-32TS1U
Figure 8-12 - Front Glass Screen
`
Reassembly
Assemble in the reverse order:
•
Screw the power supply board onto the Plasma Panel (Figure 8-10).
•
Position the Plasma Panel into bezel (Figure 8-10).
•
Fasten left and right support brackets over the handles (Figure 8-9).
•
Snake the H1 board cable harness into the TV board assembly rear and secure the assembly (Figures 8-6 &
8-8).
•
Plug in the connectors. Make sure these test connectors on the B and Q boards are empty (Figure 8-13
shows the location of empty CN1003, CN1002, CN1201 and CN3008).
Figure 8-13 - Unused
Test Connectors
B Board
CN1003
CN1002
CN1201
Q Board
CN3008
n) The inside of the TV screen is coated so do not clean or leave oil on it by touching it. The inside surface
scratches easily. Clean the inside of the TV screen if there is film or fingerprints. Use the Sony p/n X-4034-
197-1
soft cloth and diluted mild window cleaner if necessary. A 50% mix of water and window cleaner is OK.
Do not use dishwashing detergent or soaps.
