26
If you continue to experience problems, have your TV serviced by qualified personnel.
Never open the casing yourself.
Problem
Picture slanted
Noisy picture when viewing
a TV channel.
No unscrambling or unstable
picture whilst viewing a
scrambled channel with a
decoder connected through
the Scart connector
3
/
3
.
• The remote control beeps
even you have not pressed
the remote control locator
button or on the contrary,
• When you press the remote
control locator button, the
remote control does not
beep.
Remote control does not
function.
The standby indicator
on
the TV flashes.
S
Solution
• Using the menu system, select the “Picture Rotation” option
in the “Detail Set Up” menu to correct the picture slant.
• Using the menu system, select the “Manual Programme
Preset” menu and adjust Fine Tuning (AFT) to obtain better
picture reception.
• Using the menu system, select the “Noise Reduction” option
in the “Picture Adjustment” menu and select “Auto” to re-
duce the noise in the picture.
• Using the menu system, select the “Features” menu. Then
enter to “Detail Set Up” option and set “AV3 Output” to
“TV”.
• Check that the Decoder is not connected on the scart
2
/
2
.
• Using the menu system, asign an ID (number) to your remote
control. (See “Remote Control ID” on page 17).
• Replace the batteries of the remote control and asign again an
ID (number) to your remote control. (See “Remote Control
ID” on page 17).
• Check that the Media Selector on the remote control is set to
the device you are using (VCR, TV or DVD).
• If the remote control does not operate the VCR or DVD even
when the Media Selector has been set correctly. Enter the
necessary code set as explained on “Remote Control
Configuration for VCR/DVD” chapter of this instruction
manual.
• Replace the batteries.
• Contact your nearest Sony service centre.
Additional Information
03GBKV28FX66B.fm Page 26 Wednesday, January 15, 2003 5:15 PM
