Sony KV-29FQ76K, Operating Instructions Manual

Page: 71 / 148

Additional Information 21
Connecting other equipment to the TV
The following illustration explains how to connect a wide range of audio and video equipment to the rear of the TV.
Connecting a Smartlink VCR
Smartlink is a direct link between the TV and VCR. For more information on Smartlink, please refer
to your VCR instruction manual. Ensure that your Smartlink VCR is connected to the
C
socket,
using a fully-wired 21 pin Scart lead.
Connecting external audio equipment
Connect your Hi-Fi system to the
E
sockets on the rear of the TV. Use the ‘ /Audio-out Vol.’ option
in the ‘Sound Adjustment’ menu to adjust the volume level.
1. Connect your equipment as shown in the above illustration.
2. Press the / button on the remote control until the correct symbol for your equipment
appears on the TV screen (see table below).
3.
Switch on the connected equipment. The picture (if any) from this equipment appears on
the TV screen.
4.
Press the button to return to normal TV operation.
On Screen Symbol Input Signals
t 1 For equipment connected to socket
A
.
t 2 For equipment connected to socket
B
.
t 3 For equipment connected to socket
C
.
t 4 For equipment connected to socket
D
.
A
C
B
E
D
VCR
DVD
PlayStation/PSOne/PlayStation 2
Hi-Fi
Decoder
Notes: Connecting cables are not supplied.
PlayStation 2 used for illustration purposes
1 2 3
4 5 6
7 8 9
0
MODE
29FQ76 B5 Part 6 GB.fm Page 21 Tuesday, May 7, 2002 11:56 AM