Sony KV-24FS100 - 24" Fd Trinitron Wega Service Manual Download Page 75

Page: 75 / 144

Using the Remote Control and Basic Functions

Using the Remote Control

Button

Description

MUTING

Instantly turns off the sound. Press again or press

to restore

the sound.

SLEEP

Turns the TV off automatically in approximately 15, 30, 45, 60, or
90 minutes. Cancel by pressing until SLEEP OFF appears.

MTS/SAP

Cycles through the Multi-channel TV Sound (MTS) options:
Stereo, Mono, and Auto SAP (Second Audio Program).

JUMP

Press to jump back and forth between two channels. The TV
alternates between current channel and the last channel that was
selected.

VOL (volume)

Press when you want to adjust the volume.

RESET

Press to return to factory settings while in an on-screen menu.

Moves the cursor in the on-screen menus. Press the arrow buttons
to move the cursor, then press the center button to select or access
an option.

POWER

Press when you want to turn the TV on or off.

TV/VIDEO

Cycles through available video inputs.

DISPLAY

Press to display the current time (if set) and channel number.
Press again to turn DISPLAY off.

and ENTER

Change the channels directly. Press

buttons to select a

channel, then press ENTER.

CH (channel)

Press when you want to change channels.

MENU

Displays the on-screen menu. Press again to exit the menu at any
time.

If you lose your remote control, see page 32.

01US01COV-BR2TOC.book Page 13 Thursday, February 21, 2002 1:49 PM

Summary of Contents for KV-24FS100 - 24" Fd Trinitron Wega

















































































































































Search results

Summary of Contents for KV-24FS100 - 24" Fd Trinitron Wega

Reviews:

Related manuals for KV-24FS100 - 24" Fd Trinitron Wega

Brands by name

Popular brands

Sony KV-24FS100 - 24" Fd Trinitron Wega, Service Manual

Search results

Summary of Contents for KV-24FS100 - 24" Fd Trinitron Wega

Reviews:

Related manuals for KV-24FS100 - 24" Fd Trinitron Wega

Brands by name

Popular brands